상품상세 정보

뒤로가기

[][AXI03000T2]카프라 조립완료 버전 AXIAL 1/10 Capra 1.9 Unlimited 4WD RTR Trail Buggy, Green

품절

상품 정보
판매가 519200
할인판매가 519,200원 (519,200원 할인)
할인금액 총 할인금액 원
(모바일할인금액 원)
적립금

5,192원(1.00%)

무통장 결제시 적립금 %

카드 결제시 적립금 %

실시간 계좌이체시 적립금 %

적립금 결제시 적립금 %

휴대폰 결제시 적립금 %

예치금 결제시 적립금 %

에스크로 결제시 적립금 %

가상계좌 결제시 적립금 %

가상계좌 결제시 적립금 %

케이페이 결제시 적립금 %

페이나우 결제시 적립금 %

페이코 결제시 적립금 %

카카오페이 결제시 적립금 %

제휴적립금
배송방법 택배
배송비 3,500원 (70,000원 이상 구매 시 무료)
상품 추가설명 번역정보
배송
수량 down up  

추가구성상품

  • []CODDAR 4500mAh Real Shorty 7.6V 140C H.V LI-PO Battery

    58,700원

    옵션 정보
    상품선택
  • [#BM0015] [2셀 골드커넥터 충전잭 4mm → 5mm] Charging Lead - Bullet Connector 4mm to 5mm w/2S XH Balancer Cable 30cm/14AWG

    7,000원

    옵션 정보
    상품선택
  • [매장입고]NEW B6 v3 급속 충전기B6 최신버젼(파워 서플라이 포함) [KC 인증제품!!]블랙에디션

    38,000원

    옵션 정보
    상품선택
상품 목록
상품 정보 가격 삭제
총상품금액(수량) 0

할인가가 적용된 최종 결제예정금액은 주문 시 확인할 수 있습니다.

구매하기예약주문
구매하기예약주문

잘간다고 소문정도가 아닌 대박 차량 카프라의 RTR 버전이 출시 되었습니다.

킷버전과 1도 차이 없이 옵션과 함께 모든 기자제가 장착되어 가격이 합리적인 제품입니다.

배터리와 충전기 만 있으면 바로 어디든 갈수 있는 락버기! 입니다.


실제의 DIG 기능으로 업힐과 다운힐의 밀림 방지 및 어려운 난코스또한 쉽게 리얼하게 주행이 가능한 제품이며

DIG 의 기능이 필요한 서보까지 모두 장착되어 있습니다.


조종기는 STX2 에 DIG 기능을 컨트롤 할수 있는 버튼이 추가 되어 단순 2 채널이 아닌 3채널로 컨트롤이 되는 조종기

STX3 으로 새로운 제품이 기본 포함 되었으며 수신기 또한 3채널의 방수까지 되는 제품으로 장착되어있습니다.


또한 기본 비드락 휠, LED, 메탈기어 고토크 방수서보 의 기본 장착으로 바위,산행,도하,야간주행 모두 즐길수 있습니다





Product_axi03000t2_capra_rtr_950x450

Product_axi03000t1_capra_rtr_950x450

The ready-to-run Axial® Capra™ 1.9 Unlimited Trail Buggy is a “new from the ground up” design that any RC enthusiast eager for cutting-edge crawling will appreciate. Its Currie F9 Portal Axles provide extra ground clearance at the diff pumpkin for the best crawling performance. With the included Spektrum™ STX3 3-channel transmitter and DIG transmission, you can also switch on the fly between 4WD and FWD — locking the rear axle whenever you need the tighter turning radius of front drive power. The Capra features a realistic tube chassis design and metal gears everywhere, from the center transmission to the lockers and portal axles. It rides on real-world inspired Nitto Trail Grappler 1.9 tires mounted to licensed Raceline 3-piece molded beadlock wheels. For pioneering performance in an RC trail buggy with factory-assembled ease, choose the Capra 1.9 Unlimited RTR. Then just add batteries and get crawling!
Axi03000t2_front_3-4_950
Axi03000t1_front_3-4_950
Skidplate_mount_points_950
Tires_470px
Wheels_470px

NITTO TRAIL GRAPPLER TIRES
Get a secure grip on dirt, rocks, and all other off-road trails from the S30 compound Nitto Trail Grappler 1.9 tires.

3-PIECE BEADLOCK WHEELS
For striking scale looks and serious trail performance, Axial® has outfitted the Capra™ with 3-piece licensed Raceline beadlock wheels.

Interior_470px
Front_grille_470px

REALISTIC INTERIOR
Realistic scale details include: polycarbonate interior tray with molded driver figures, full color pre-cut decals with simulated carbon fiber panels, mock GPS navigation gauges and switches, two black styrene helmets with visor decals, and more!

GRILLE AND HEADLIGHT BUCKETS
The molded plastic front grille features two clear plastic headlight lenses with light buckets and a white LED light installed in each. Behind the grille, under the hood, are two hood mounts with clips. Remove the clips to raise the hood up and gain access to the battery tray.

Hood_pin_470px
Servo_horn_470px

HOOD RELEASE
Remove the clips hidden on the underside of the tube frame to raise the hood up and gain access to the battery tray.

SERVO HORN WITH METAL INSERT
The servo horn features a 23T press fit metal insert for durability.

Battery_tray_470px
Dyns1216_35t_motor_470px

BATTERY TRAY
The battery tray is forward mounted, and located under the hood. The tray size is built for shorty packs, at a maximum size of 26mm x 98mm x 47mm.

35T BRUSHED MOTOR
Delivering an even balance of speed and technical crawling, the included 540 size, 35T motor features a hassle-free design with enlarged cooling ports for extended periods of use.

Stx3_transmitter_470px
Srx300_receiver_470px

SPEKTRUM™ STX3™ 2.4GHz RADIO SYSTEM
The STX3™ 3-channel radio system offers many features of higher-end 2.4GHz radio systems like throttle/steering reversing, throttle/steering travel adjust & throttle limiting, as well as third channel button controls for dig operation.

• Thumb controls allow operation of the dig feature
• Built-in 3-position throttle limiter
• Steering & throttle rate & trim adjustments with throttle and steering reversing
• FHSS 2.4GHz protocol offers extended range and interference free performance

SPEKTRUM™ SRX300 RECEIVER, WATER-RESISTANT
The SRX300 is a 3 channel 2.4GHz receiver that operates on the FHSS modulation. It is conformal coated to help prevent damage from water, dust and other elements. Features an extra-long antenna lead for easy and effective antenna placement.

Ae-5l_esc_470px
S614_servo_470px

DYNAMITE® AE-5L ESC W/ DRAG BRAKE, WATERPROOF
The Dynamite AE-5L ESC is 3S LiPo capable yet easily switched “in the field” between LiPo and NiMH battery types with a simple jumper – no more complex procedures.

• LED light bar and two front mounted LED lights included
• Convenient IC3™ plug lead
• Jumper 1 provides a simple plug and play choice between LiPo or NiMH
• Jumper 2 switches Drag Brake settings
• Waterproof design with IC3™ plug / laser etched heat sink

NOTE: Requires shorty battery pack with IC3™ connector.

SPEKTRUM™ S614 SERVO, WATERPROOF
The Spektrum S614 metal geared servo offers 201 oz-in of steering torque, a metal case for strength, and it’s waterproof for extra protection against the elements. The axle-mounted servo allows better steering control in full articulation.

Axi03000t1_side_950
Color_choices_950
Led_lights_2_950
Currie_f9_axle_950
Capra_axle_01_950
Capra_portal_gears_470px
Capra_high_pinion_gears_470px

CURRIE F9 PORTAL AXLES
The Currie F9 Portal Axles add substantially more ground clearance at the diff pumpkin while also providing an excellent 7.39:1 gear ratio. Completely ball bearing driven, and metal gears throughout for durability.

HI-PINION GEARS
The ring and pinion gears are machined steel, including the locker. The design utilizes a six bolt design for durability.

Capra_portal_gears_470px

Capra_high_pinion_gears_470px

CURRIE F9 PORTAL AXLES
The Currie F9 Portal Axles add substantially more ground clearance at the diff pumpkin while also providing an excellent 7.39:1 gear ratio. Completely ball bearing driven, and metal gears throughout for durability.

HI-PINION GEARS
The ring and pinion gears are machined steel, including the locker. The design utilizes a six bolt design for durability.

Capra_transmission_gears_470px

Capra_transmission_2_470px

DIG TRANSMISSION
The ground up designed transmission features a "Dig" function. With the new STX3 transmitter, the user can "switch" between 4WD and locking the rear axle while powering with front drive only, allowing for tighter turning radius on the rocks. The transmission also includes a full set of ball bearings and all metal internal gears for strength and durability. Micro Dig Servo SPMSSX107 included!

Dig_servo_950


Capra_universal_axles_470px

Wildboar_driveshafts_470px

UNIVERSAL AXLE SET
Universal joint axles allow up to 45 degrees of steering and provide smoother action for a higher performing, efficient drivetrain.

• Up to 45 degrees of steering
• Smooth action for an efficient drivetrain
• Compact yet durable design
• Hardened steel construction

WB8 HD WILDBOAR™ DRIVESHAFTS
WB8 HD Wildboar™ front and rear driveshafts feature a larger diameter cross pin (2x11mm) along with an M4 Screw Shaft (2mm hex drive) for greater strength. A center splined slider floats between each end and has added material to reduce flex and fatigue.












ARRMA/AXIAL 차량 퀵가이드.


우선 저희 제품 이용을 해주셔서 감사의 말씀 드립니다.

이 퀵 가이드는 숙련자용이 아닌 기본적으로 처음 입문 또는 저희 제품을 처음 이용하시는 분들께

도움이 되고 자 제작된 매뉴얼입니다. 제품마다 차이가 있음을 미리 안내 드리며 용어는 공통으로 사용되는

경우가 많으니 참고 하시면 되겠습니다.


우선 저희 호라이즌 제품은 Team Losi / Vaterra / ECX / ARRMA / AXIAL 제품군으로 이루어 져 있습니다.

각각 조종기는 Spektrum ECX 제품 그리고 TACTIC 으로 이되어있습니다. 공통적으로 사용되는 조종기 기준으로 설명 드리겠습니다.


RTR 기준 제품 박스 내에 제품의 본체 조종기 액세사리 가 구성 되어있습니다.


1.차량에 주 배터리 를 장착 합니다. / 조종기에는 AA 배터리를 하단부에 장착 합니다\

2.차량의 컨넥터를 연결 합니다.

3.전원을 켜기에 앞서 조종기를 먼저 켭니다.

4.조종기에 TH Trim / ST Trim 을 눈금을 확인 하여 중간에 맞춰 놓습니다.

5.그후 차량을 켭니다. 켜신후 약 2~3초 대기해주세요 (변속기 및 자이로 초기화 시간)

6.그후 자이로 및 조향 방향 전후진 방향을 확인 합니다.

7.즐거운 주행을 하시면 됩니다.


조종기 조절 스위치

TH Trim – 전후진의 중립부분 미세 조절합니다. (무조건 중간에 설정합니다.)

ST Trim – 좌우 조향의 중립을 미세 조절합니다. (직진시 한쪽으로 흐르지 않게 조절합니다.)

Reverse 스위치 TH/ST – 조종의 방향을 변경합니다 좌우 또는 전후진의 방향

ST D/R , TH D/R – 조향 의 타각량 조절 또는 전후진의 속도 조절을 합니다.

BIND – 차량과 조종기의 주파수적인 부분을 연결시 사용합니다 (일반적으로 사용하지 않습니다.)







상품 상세 정보
상품명 [][AXI03000T2]카프라 조립완료 버전 AXIAL 1/10 Capra 1.9 Unlimited 4WD RTR Trail Buggy, Green
상품요약정보 조종기 포함, 배터리,충전기 별도 3셀 배터리 사용가능 ,쇼티배터리 사용
제조사 AXIAL
상품코드 AXI03000T2
소비자가 649,000원
판매가 519,200원
적립금 5,192원 (1%)

결제 안내

배송 안내

  • 배송 방법 : 택배
  • 배송 지역 : 전국지역
  • 배송 비용 : 3,500원
  • 배송 기간 : 3일 ~ 7일
  • 배송 안내 :

교환/반품 안내

서비스문의 안내

상품사용후기

상품후기쓰기 모두보기

게시물이 없습니다

상품 Q&A

상품문의하기 모두보기

게시물이 없습니다

판매자 정보