- R/C용 부품입니다.
- 사진은 조립의 예이며, 휠, 차량 미포함입니다. 


Description: 


This is a Pro-Spec Shock Kit for 1:10 buggy Front. The next generation of Pro-Line Shock Technology has arrived: Pro-Line Pro-Spec Shocks for 1:10 Buggies! Every last detail has been refined to give you the best performing and best looking Shocks ever made. The Pro-Spec Shocks are a 12mm Big Bore design with a Single Low Friction X-Ring Seal. The Pistons and Shaft Guides are made from Silky Smooth White Delrin for Low Stiction and the 3.5mm thick Shock Shaft is Hard Chrome Coated, just like full scale racing shocks.
The Pro-Spec Shocks feature an easy access Bleeder Cap Screw for consistent shock builds every time. Each pair of Pro-Spec Shocks includes 3 different piston options (1.4, 1.6 & 1.8) and a blank piston for drilling to a custom size. Custom Shock Tightening Tools and optional shock limiters are also included. Pro-Line’s new Pro-Spec Shocks come in kit form with build instructions, so you can build the shocks exactly how you want. Your current 12mm big bore buggy springs bolt right up so you can get exactly the spring rate you are used to. Upper and lower shock pivot balls are included so you can fit a wider range of vehicles right out of the box. Optional +2, +4 and +6mm spring perches are included to fit a wide variety of buggies and shock springs.
Experience the Performance of Pro-Line’s Next Generation Shock Technology for yourself - Get Pro-Spec Shocks!
*Buggy Springs Not Included* - Use any 12mm Big Bore Buggy Spring



Search:
6267-00 | Pro-Spec Shock Kit for 1:10 buggy Front 


Features: 


Smoothest Shocks Pro-Line has ever made
12mm Big Bore Technology
Single Low Friction X-Ring Seal
Silky Smooth White Delrin Shaft Guides and Pistons
Easy Access Bleeder Cap Screw
Hard Chrome Coated 3.5mm Shock Shaft
Optional Pistons and Limiters Included
Use any 12mm Big Bore Buggy Springs
Pair with the Pro-Spec Rear Shocks


What's Included: 


*Buggy Springs Not Included* - Use any 12mm Big Bore Buggy Spring

6267-02 1:10 Buggy Pro-Spec Front Shock Shaft Set
6267-03 1:10 Buggy Pro-Spec Front Shock Body Set
6267-06 Pro-Spec Shock Optional Spring Retainer Pack
6308-02 Pro-Spec Delrin Piston & Guide Tree
6308-03 Pro-Spec Plastic Tree
6308-04 Pro-Spec Shock O-Rings
6308-05 Pro-Spec Shock Hardware
6308-06 Pro-Spec Shock Cartridges


Fits: 


Associated B5 & B5m
Associated B44.3 *Unscrew front shock eyelets 3 turns to get stock front length
Kyosho RB6
Kyosho ZX-6 *Limit the front shock droop 1mm and Unscrew rear eyelet 1 turn for stock length
TLR 22 2.0 *Use stock 22 2.0 shock balls in the Front Shocks and Unscrew Front and Rear eyelet 3 turns for stock length
TLR 22-4 *Use #6308-01 shocks in the Rear with 2mm of limiters to get stock rear shock lengths and use stock 22-4 shock balls in the Rear Shocks
Yokomo B-Max 2 *Unscrew rear shock eyelets 2 turns to get stock rear length
Yokomo B-Max 4
Hot Bodies D413 *Use 6267-01 in the Front with 5mm of limiters and use 6308-01 or 6308-31 in the Rear. Use 2mm spacers on the top of the shocks to get the correct shock angle.


Specs:


FRONT 1:10 Buggy Pro-Spec Shock (#6267-00) Specs: 



Stroke

20.5mm

Extended Length

76.5mm

Collapsed Length

56mm

Weight

13.3g

REAR 1:10 Buggy Pro-Spec Shock (#6267-01) Specs : 



Stroke

27mm

Extended Length

91mm

Collapsed Length

64mm

Weight

18.0g


Length Measured Eyelet center to center
Stroke, Extended and Collapsed Lengths are adjustable with the included Limiters
Buggy Springs Not Included - Use any 12mm Big Bore Buggy Spring